WAREHOUSE / LOGISTICS / FACILITY LIGHTING

Warehouse PoE Lighting
Start with the building. Then engineer the power.

Warehouse lighting must provide useful visibility for stock picking, label reading, pallet movement, loading and safe circulation. Power over Ethernet can be considered for suitable fixtures and zones, but ceiling height, required light output, operating conditions and total power demand determine whether it is a practical choice.

DESIGN THAT FITS THE BUILDING

Start with the application, not an equipment list.

PoE is a method of distributing power and data—not a substitute for photometric design, electrical planning or full-system compatibility testing. Secure Luma evaluates how fixtures, drivers, switches and lighting controls would work together in the actual facility.

How PoE lighting works →
Illustrative commercial lighting system design reference
Conceptual lighting image; not a completed Secure Luma installation
SITE-SPECIFIC PLANNING

Design around how each area is used.

Different rooms and work zones need different illumination, power allowances and control functions.

01 / PROJECT ZONE

Storage and picking aisles

Review rack shadows, aisle widths, work-plane illumination and intermittent occupancy. Design zones around how employees and forklifts actually move.

02 / PROJECT ZONE

Loading and receiving

Consider door positions, daylight transitions, pedestrian routes and task visibility. Confirm fixture suitability for the environment and mounting position.

03 / PROJECT ZONE

Packing and staging

Assess task-focused lighting, operating hours, dimming expectations and accessible network pathways before deciding on a power distribution method.

04 / PROJECT ZONE

Offices and support rooms

Adjacent areas with lower-watt LED fixtures may be better initial PoE candidates than high-output industrial high-bay luminaires.

DESIGN PRIORITY 01

High-bay lighting is not automatically PoE-compatible

Some industrial high-bay LED fixtures require substantially more power than a standard Ethernet-powered device can receive. A Type 4 PoE source rated at up to 90 W delivers less at the powered-device side once permitted cable losses are accounted for. Conversion losses and control electronics consume additional power. The required lumens and distribution come first; equipment power design follows. For higher-output zones, conventional line-voltage luminaires with separate networked controls may be more appropriate.

DESIGN PRIORITY 02

Power and data must be assessed as one system

Check the selected switch's per-port PoE class, total PoE availability, cable quality and length, driver efficiency, heat and control behavior. A published UniFi switch wattage rating does not, by itself, prove interoperability with a third-party PoE lighting driver. Manufacturer confirmation and full-system validation are required before qualifying an installation combination.

DESIGN PRIORITY 03

Wiring, safety and controls

Commercial cable routes need suitable solid-copper conductors, correct jacket ratings, proper terminations and documented testing. Evaluate local building and electrical requirements, emergency lighting, power outages, sensor-based zoning and whether occupants retain appropriate control if the network connection or cloud service becomes unavailable.

DESIGN PRIORITY 04

Preparing for a feasibility review

Useful information includes warehouse square footage, ceiling height, lighting plans, existing fixture wattages, desired control schedules, occupied zones and rack/network locations. This allows a meaningful first estimate without promising that all fixtures can be powered from one switch.

USEFUL NEXT STEPS

Review power calculations and published technical references.

For preliminary power sizing, use our UniFi lighting planner. Compare real hardware references in the equipment catalog and read our equipment qualification process.

External references: UniFi published PoE switch specifications and U.S. Department of Energy guidance for commercial LED lighting.

TECHNICAL PROJECT REVIEW

Discuss Your Warehouse Lighting

Share your layout, fixture information, desired controls and operating schedule for a project-specific discussion.

Request ConsultationExplore office PoE LED panels →